Saw Machine
Model: Saw Machines - SWM-02more >>Introduction:
A. Firm structure. Small shaking. High precision for cutting
B. When adjusting dimension, there is orientation device with digital display.
C. Server motor drive for charging.
D. Cutting dimension: Height: 120mm Weight: 120mm Length: 6mm to 400mm
E. After finishing cutting profiles, jaws on both right and left sides open automatically.
Model: Saw Machine - SWM-01more >>Introduction:
1. Firm structure. Small shaking. High precision for cutting
2. Vertical cutting angle: 90° ~ 45°
3. Cutting dimension: Height: 100mm Weight: 100mm
Model: Hot Log Shear - SWM-03more >>Introduction:
1. The method for cutting billets is cutting from up to down.
2. This equipment has the function of aluminum billet saw and operates in coordination with
LPG direct fire billet heating furnace. You can adjust the length of billet quickly and do all the
processes at one time. Thus, it can save manpower cost for cutting aluminum billet.
3. The rest aluminum billet can be connected to next billet so it can retrench loss of 5mm billet each time.
Thus, there will be no waste material.
4. You can change different quality of aluminum billets which are the same size as you wish.
You do not need to change shear blade. Thus, you can retrench operating time.
5. It can heat from normal temperature to operating temperature in a short time and can retrench gas
consumption effectively.
6. There is an automatic sensor. The light will be on when there is no billet on shelf.
Model: Hydraulic Finish Product Saw - SWM-04more >>Introduction:
A. Firm structure. Small shaking. High precision for cutting
B. It can collocate with length gauge table and it is controlled to cut by hydraulic.
C. Cutting Height: 125mm Width: 330mm
175mm 430mm
150mm 580mm
It can depend on customers' demand to choose.
D. Cutting Length: 10mm to 6000mm. It can depend on customers' demand to choose.
E. Manually adjust length gauge.
Model: Finish Product Saw - SWM-05more >>Introduction:
A. Firm structure. Small shaking. High precision for cutting
B. Cutting dimension: Height: 125mm Weight: 330mm
C. Cutting Length: 10mm to 550mm
D. Manual screw length gauge
This finish product saw can collocate with Manual screw length gauge.
Model: Aluminum Billet Saw - SWM-06more >>Introduction:
1. This equipment can put a lot of billets on the storage table and continuously cut billets.
2. This equipment uses PLC electricity automatic control and it is easy to operate.
3. Cooling cutting oil automatically supply and stop.
4. It can depend on the billet length and material to adjust the cutting length and speed.
5. Cutting diameter of Billet: φ3"~φ8";φ4"~φ10"
6. Cutting one cycle time: φ3"~φ6" about 12 seconds; φ7"~φ10" about 30 seconds
