Aluminum Extruder,Extrusion Press Machine,Aluminum Extruder Manufacturer, Aluminum Extrusion Machine, Aluminum Extrusion Equipment,Wholesale Aluminum Extruder,Aluminum Extruder Company, Supplier, Factory, Exporter, Products, - Product OEM ODM

Aluminum Extrusion Press

There are different inches of press such as 3.5"*14"L (580US TON), 4"*16"L (690US TON),

4"*18"L (690US TON), 5"*20"L (930US TON), 5.5"*22"L (1100US TON), 6"*24"L (1450US TON),

7"*28"L(1800US TON), 8"*30"L(2200US TON), 9"*36"L (2750US TON).

Description:

Horizontal, Four Tie Rods, Hydraulic system, PLC for electric power, Semi-automatic control,
Easily operated, Automatic holding die slide and Automatic charging into container.

Features:
This extrusion press is equipped with variable piston pump which can automatically control
the output of pump according to the change of pressure. Electric power consumption is low
and oil temperature does not easily rise up. Speed control is also available. Thus, it can
have best operating efficiency.

Our special design is Double Shears:
Square shears which are durable and not easily oblique and hydraulic shear knocker is attached.

Machine	Dimension of Aluminum Ingot		Horsepower		Power	Weight	Dimension(LengthWidthHeight)
Model
	D	L	(Taiwan)	(Overseas)	KW	TON	L	W	H
YS-580	3"-4"	14"	60	60	14.4	15	5395	2170	2720
YS-690	4"-4.½"	16"	85	85	18	19	6045	2570	2962
YS-690	4"-4.½"	18"	100	100	22.5	20	6295	2570	2962
YS-930	4.½"-5"	20"	125	125	24	28.5	7143	2893	3162
YS-1100	5"-5.½"	22"	200	200	32.4	39	7489	3185	3470
YS-1450	5"-6"	24"	125*2	125*2	36	65	11030	3800	4150
YS-1800	6"-7"	28"	325	325	42	93	12660	4324	4370
YS-2200	7"-8"	30"	400	400	67.5	117	13525	4565	4825
YS-2750	8"-9"	36"	625	625	74.25	190	16077	4827	5498

Aluminum Extrusion Machine

More details please contact us, thank you.

Extrusion Press

More details please contact us, thank you.

Aluminum Extruder

More details please contact us, thank you.

Aluminum Extrusion Machines

More details please contact us, thank you.

Aluminum Extrusion Equipment

More details please contact us, thank you.

Extrusion Press Machine

Model:

This automatic puller operates in coordination with 580 US Ton~4400 US TON Aluminum Extrusion Press to produce various special industrial aluminum products. It is easy to operate and retrench manpower.

Feature:

This machine is made of steel which can gauge length with front platen saw table. This machine uses D.C. motor drive; A.C. motor drives the jaw. Sprocket automatically clips aluminum profiles in coordination with chains. According to the extrusion press extruding speed, it can adjust the speed and twisting force of jaw appropriately. Thus, the accuracy of aluminum products can be attained. Return stroke uses magnetic brake. D.C. controlling system controls operating forward stroke or return stroke and pulling force. It can continue operating in coordination with extrusion press extruding recycles by working speed of 1.8 M/second to 2.2M/second.

Automatic Puller

More details please contact us, thank you.

Extruding Machine

More details please contact us, thank you.

Extrusion Pullers

More details please contact us, thank you.

Stretching Machine

Introduction:

This machine is made of steel. The head of jaw is driven by hydraulic system.

The tail of jaw can adjust length of the aluminum profile and change position.

1. Pulling Force: 15US TON~230US TON

2. Straightening length: 3M-50M

3. Straightening stroke: 700mm~1200mm

4. Opening of jaw: 90mm~300mm

Stretching Machines

More details please contact us, thank you.

Extrusion Press Stretcher

More details please contact us, thank you.

Extrusion Stretchers

More details please contact us, thank you.

Extrusion Stretcher

More details please contact us, thank you.

Automated Handling System

Model:

This equipment consists of Initial table, Roller Sleeve Raise/lower conveyer (Adjustable speed), Run Out transfer table (Flat Transfer Type), Cooling table (Flat Transfer Type), Stretcher, Stretcher Transfer table (Flat Transfer Type), Storage table (Flat Transfer Type), Sawing Transfer Table (Roller Sleeve Type), Product sawing table, Length gauge table, automatic control.

Feature:

It is used for big machines such as 2200US TON ~4400US TON Aluminum Extrusion Press. Because big profiles are heavier and there is no belt slippery problem for Flat transfer equipment. Besides, the straight is more stable for Flat transfer equipment.

Automatic Handling Systems

More details please contact us, thank you.

Aluminum Fabrication Equipment

More details please contact us, thank you.

Automatic Handling System

More details please contact us, thank you.

Automatic Handling System

More details please contact us, thank you.

Automatic Handling System

Description:

This equipment consists of Initial table, Roller Sleeve Raise/lower conveyer (Adjustable speed), Run Out transfer table (belt type), Cooling table (belt type), Stretcher, Stretcher Transfer table (belt type), Storage table (belt type), Sawing Transfer Table (Roller Sleeve Type), Product saw table, Length gauge table,

automatic control.

Feature:

Products are not easily broken because it is conveyed by High temperature resistance blanket belt. It is used for 580US TON ~1800US TON Aluminum Extrusion Press.

Saw Machines

Introduction:

A. Firm structure. Small shaking. High precision for cutting

B. When adjusting dimension, there is orientation device with digital display.

C. Server motor drive for charging.

D. Cutting dimension: Height: 120mm Weight: 120mm Length: 6mm to 400mm

E. After finishing cutting profiles, jaws on both right and left sides open automatically.

Saw Machine

Introduction:

1. Firm structure. Small shaking. High precision for cutting

2. Vertical cutting angle: 90° ~ 45°

3. Cutting dimension: Height: 100mm Weight: 100mm

Hot Log Shear

Introduction:

1. The method for cutting billets is cutting from up to down.

2. This equipment has the function of aluminum billet saw and operates in coordination with

LPG direct fire billet heating furnace. You can adjust the length of billet quickly and do all the

processes at one time. Thus, it can save manpower cost for cutting aluminum billet.

3. The rest aluminum billet can be connected to next billet so it can retrench loss of 5mm billet each time.

Thus, there will be no waste material.

4. You can change different quality of aluminum billets which are the same size as you wish.

You do not need to change shear blade. Thus, you can retrench operating time.

5. It can heat from normal temperature to operating temperature in a short time and can retrench gas

consumption effectively.

6. There is an automatic sensor. The light will be on when there is no billet on shelf.

Hydraulic Finish Product Saw

Introduction:

A. Firm structure. Small shaking. High precision for cutting

B. It can collocate with length gauge table and it is controlled to cut by hydraulic.

C. Cutting Height: 125mm Width: 330mm

175mm 430mm

150mm 580mm

It can depend on customers' demand to choose.

D. Cutting Length: 10mm to 6000mm. It can depend on customers' demand to choose.

E. Manually adjust length gauge.

Finish Product Saw

Introduction:

A. Firm structure. Small shaking. High precision for cutting

B. Cutting dimension: Height: 125mm Weight: 330mm

C. Cutting Length: 10mm to 550mm

D. Manual screw length gauge

This finish product saw can collocate with Manual screw length gauge.

Aluminum Billet Saw

Introduction:

1. This equipment can put a lot of billets on the storage table and continuously cut billets.

2. This equipment uses PLC electricity automatic control and it is easy to operate.

3. Cooling cutting oil automatically supply and stop.

4. It can depend on the billet length and material to adjust the cutting length and speed.

5. Cutting diameter of Billet: φ3"~φ8";φ4"~φ10"

6. Cutting one cycle time: φ3"~φ6" about 12 seconds; φ7"~φ10" about 30 seconds

Aluminum Billet Furnace

Introduction:

Type: Tunnel Continuous type

Method: Both sides direct fire heating

Advantage: Temperature rising speed is fast. It is less fuel, equal temperature,

stable, exact temperature. It fits in with fewer amount and multiple

demands nowadays. Whole systems are automatic control. Charging

from up and discharging from down, temperature inspection, and fire

control are controlled by USA ALLEL BRADLEY PLC and HML PANEL.C

Billet Heat Furnace

Type: 1. Electricity 2. LPG / LNG 3. Electricity( front) + LPG (back)
Heating Method: Burner Heating. Heated Air Circulation . Wind Circulation Up to Down
Temperature Control: 2~3 Section Proportional Control
Transfer Method: Chain transfer

Aluminum Billet Heat Furnace

Introduction:

Type: Tunnel Continuous type

Method: Both sides direct fire heating

Advantage: Temperature rising speed is fast. It is less fuel, equal temperature,

stable, exact temperature. It fits in with fewer amount and multiple

demands nowadays. Whole systems are automatic control. Charging

from up and discharging from down, temperature inspection, and fire

control are controlled by USA ALLEL BRADLEY PLC and HML PANEL.

Die Heat Furnace

Type: 1. Cart 2. Top open

Heating Method: Heated Air Circulation

Temperature Control: One section Automatic Control. With Over Heat Protection

Timer Control: 24 hour Timer.

Aluminum Furnace

Type: 1. Electricity 2. LPG/LNG

Heating Method: Burner Heating. Heated Air Circulation from right to left or front to back.

Temperature Control: One Section Temperature Control

Timer Control: ASY-3D Timer

Aging Funrace

More details please contact us, thank you.